Diversion Images photography services - Sport, commercial, studio, eventDiversion Images photography services - Sport, commercial, studio, event

Don’t knock the 28-300….

I shot the 2009 Go Natural Multisport yesterday, and for it’s versitility, I used my 28-300. On a day where I had to move quite a bit and carry a variety of set-ups, the 28-300 really excelled.

Image Courtesy of Canon.com.au

Image Courtesy of Canon.com.au


I needed to be able to shoot cyclist, Kayakers, and Runners with the smallest set up possible. This lens, and a fish eye, are all I used all day. Some people have been quite harsh on this lens for not being as sharp as others (70-200), but for it’s range and size it does a really great job, and I can’t fault the results. Would I use it for a studio magazine cover…..not likely, but I’m not shooting for that. I’m outdoors lugging my fat arse backpack up hills.

Even with a hot-shot or wireless flash the lens performed admirably. I’ll definitely use this lens again when shooting adventure races.

Failure of archive server…

My archive server at http://archive.diversionimages.com.au has recently kicked up it’s heals and died. As a result, some images, videos and galleries will not work until I can get the replacement up and working.

If you need any archive images urgently, please use the contact page to send me an e-mail.

Cheers, Trent.

Manly Dam Remote Flash and Video Tests

Today’s goals were to test some mountain bike set-ups and remote flash set-ups. I am hoping to put in a good display at the MTB world champs in September with both stills and video snippets.

VIDEO TESTS
The main test here was sound. I am using the JCV 3CCD HD camcorder because of its compact size, but the on board sound is none too crash hot. I’ve made a lead that goes from the 3.5mm stereo jack to 2 x XLR connectors. These are attached to RODE M3 9Volt Powered Microphones. I wanted external sound and to exaggerate the stereo affect by spacing the mics well apart.
The first example is with runners….



Then MTB’ers….the set-up is at the end of this one.

FLASH TESTS
I’ve still got quite a bit of work to do on this, but getting there. My main problem is the lighting and location. Full sun is not too good, full shade or heavily backlit are good, but you need to get a location of the course that has these conditions, and a descent spot.
The Dual flash is working well. Shot most of today at 1/1000 sec and f5.6. The PocketWizards work really well with the high speed sync. Hypersync is ok from 1/400 – 1/800, but over that it’s not all that good.


Heres a video of the last setup I tried….

Blayney Wind Farms

Over the Queen’s Birthday long weekend end, I decided to drive to Blayney in western NSW to photograph some wind farms at night. It was going to be cold and the weather forecast said showers. It turned out much worse than that! The wind farms are at 1000m and were totally covered in low cloud. I got nothing, but cold and wet.
Everything worked well; my plans and location scouting on GoogleEarth were good, gear was good…..everything but the weather was on my side. Oh well….better luck next time.


Beam Cross Trigger – 9 Volt Longevity Test…

Some time ago I changed my beam cross trigger to 9 Volt to make batteries easier to get. However, I had no idea how long the system would work on such a small battery. The 12 Volt system would run for days, but it’s not so easy to get 12 V batteries when you travel.

The test in the video was to see how many switches you would get from a 9 Volt battery. I had tested “static” life at 5 1/2 hours, but I didn’t know if triggering would have a bearing on the battery life…….seems not. Check the Video.

Get the Flash Player to see this content.

I am guessing over 500,000 triggers will do fine. I hope to give the trigger a run at an event this weekend. We’ll see how it goes in the field.